Commercial LED Lighting Installers - Lighting Design & Installation.
Commercial LED Lighting Design & Installation
Coupled with the huge reduction in running costs, long term carbon reduction and a very small maintenance requirement, LED really is a winner all-round!! Empower Energy’s attention to detail with design, and commitment to quality both with products and installation, has brought us an enviable reputation. Our partnership with Philips has brought together the latest intelligent lighting solutions on the market today, with the know-how and back-up that Empower is synonymous with.
Why The Right Technology For Your Commercial LED Lighting Installers Project?Emitting Diodes have come a long way over the last few years… The poor colour rendering and ghostly whites are a thing of the past and their efficiency is constantly improving.
Not all LED’s are the same and there are many manufacturers worldwide on the internet claiming “they have the best and they will last for ever”.We only use quality lights from the best known brands and with the highest luminous efficacy. Coupled with our unrivalled customer service ensures customer satisfaction from conception right through to delivery.
- Lifetime: 50,000 hours L70
- Energy efficent: up to 132lm/ W
- Consistent color rendering (CRI = 80) in compliance with EN-12464-1
- Point-for-point replacement of 250W and 400W conventional HPI high-bays
- DALI and emergency lighting options available
- Motion detector for automized dimming
- Minimum dimming level is fixed at 25%
- Max. height 13m, Max. diameter 10m
- Easy to install due to hook mounting and external IP65 connector
- Lens optics for good optical distribution, effective glare control
- Wide detection area for the sensor to optimize coverage
3D Modelling Software
How We Calculate Your Commercial LED Lighting Installers Project.
With the rising cost of energy and ever increasing demand for high efficiency lights, the LED market is rapidly expanding. LED's promise high efficiency, but the cost is still higher than traditional lights. So how can Empower Energy design team get more light out of an LED design to reduce the lights required ? Let’s take a look at how we design your new LED lights: The Dialux software design tool draws from an extensive library of LED's, drivers and heat sinks to design your complete lighting system. Dialux software enables our in-house design team to perform real-time comparisons using 3D graphical visualisation.
We start the design by understanding your existing lights and existing LUX levels and from this point we then need an understanding of what your requirements are within the areas we are designing. Usually this will have been ascertained from our site assessment and consultation.
So, for example if we design a manufacturing area, the required LUX could be between 700 and 1000 depending on Clients requirements. We start with our on-site technical survey to calculate the size of the area and height of the existing lighting and measure the levels to understand the existing LUX levels. Our designers input the measurements and build the area. Once we have the full design built into the software, we then select the desired light output in lumens and the right luminaire and populate our 3D modelling software.
Commercial LED Installation
- November 16, 2018
- January 29, 2018
- November 30, 2017